Knots to Miles Per Hour Converter (kt to mph) (2024)

All Conversions Length Conversion
Area Conversion
Volume Conversion
Volume to Weight
Weight Conversion
Weight to Volume
Speed Conversion

Conversion Table

How to convert

1 knot (kt) = 1.150779448 mile per hour (mph). Knot (kt) is a unit of Speed used in Standard system. Mile Per Hour (mph) is a unit of Speed used in Standard system.

Knots

Definition of Knots

Knots, commonly denoted kn, is a unit of speed equal to one nautical mile per hour, exactly 1.852 km/h (approximately 1.151 mph or 0.514 m/s). It is the standard unit of speed used in meteorology, and in maritime and air navigation. A vessel travelling at 1 kn along a meridian travels approximately one minute of geographic latitude in one hour.

How to Convert Knots

To convert knots to other units of speed, we need to multiply or divide by the corresponding conversion factors. For example, to convert knots to kilometers per hour, we need to multiply by 1.852, since there are 1.852 kilometers in one nautical mile. To convert knots to meters per second, we need to divide by 3.6, since there are 3.6 seconds in one hour.

Here are some examples of how to convert knots to other units of length in the US Standard system and the SI system:

• To convert 10 kn to kilometers per hour (km/h), we multiply by 1.852: 10 kn x 1.852 = 18.52 km/h
• To convert 20 kn to miles per hour (mph), we multiply by 1.1507794480235, since there are 1.1507794480235 miles in one nautical mile: 20 kn x 1.1507794480235 = 23.01558896047 mph
• To convert 30 kn to feet per second (fps), we multiply by 1.6878098571012, since there are 1.6878098571012 feet in one meter: 30 kn x 1.6878098571012 = 50.634295713036 fps
• To convert 40 kn to meters per second (m/s), we divide by 3.6: 40 kn / 3.6 = 11.111111111111 m/s
• To convert 50 kn to meters per minute (m/min), we multiply by 60, since there are 60 minutes in one hour: 50 kn x 60 = 3,000 m/min
• To convert 60 kn to centimeters per second (cm/s), we multiply by 100, since there are 100 centimeters in one meter, and divide by 3.6: 60 kn x 100 / 3.6 = 5,000 cm/s

Where Knots Are Used

Knots are used in various fields of science and technology where the speed and direction of movement of objects or phenomena are measured or applied in relation to water or air currents. For example:

• In meteorology, knots are used to measure wind speed and direction, as well as the speed and direction of storms, hurricanes, and other weather phenomena.
• In maritime navigation, knots are used to measure the speed and direction of ships, boats, submarines, and other watercraft, as well as the speed and direction of ocean currents, tides, and waves.
• In air navigation, knots are used to measure the speed and direction of aircraft, helicopters, rockets, satellites, and other aerospace vehicles, as well as the speed and direction of air currents, jet streams, and wind shear.

History of Knots

The origin of knots as a unit of speed can be traced back to the ancient practice of measuring the speed of ships by using a device called a chip log or log-line. This device consisted of a wooden board attached to a rope with knots tied at regular intervals along its length. The board was thrown overboard from the stern of the ship and allowed to drag behind it while the rope was let out for a fixed amount of time (usually measured by a sandglass). The number of knots that passed over the rail of the ship during that time indicated the speed of the ship in nautical miles per hour.

The first recorded use of this method was by the Phoenicians around the second millennium BCE. The device was later improved and standardized by various civilizations such as the Greeks, Romans, Arabs, Vikings, Chinese, and Europeans. The length of the nautical mile and the spacing of the knots varied from place to place and from time to time until they were fixed by international agreement in the late nineteenth century.

The term knot was derived from the Old English word cnotta meaning “a knot”. It was first used as a unit of speed by English sailors in the early seventeenth century.

Example Conversions of Knots to Other Units

Here are some examples of how to convert knots to other units of speed, using the conversion factors given above:

• To convert 100 kn to kilometers per hour, we multiply by 1.852: 100 kn x 1.852 = 185.2 km/h
• To convert 200 kn to miles per hour, we multiply by 1.1507794480235: 200 kn x 1.1507794480235 = 230.15589792094 mph
• To convert 300 kn to feet per second, we multiply by 1.6878098571012: 300 kn x 1.6878098571012 = 506.34295713011 fps
• To convert 400 kn to meters per second, we divide by 3.6: 400 kn / 3.6 = 111.11111111111 m/s
• To convert 500 kn to meters per minute, we multiply by 60: 500 kn x 60 = 30,000 m/min
• To convert 600 kn to centimeters per second, we multiply by 100 and divide by 3.6: 600 kn x 100 / 3.6 = 50,000 cm/s
• To convert 700 kn to millimeters per minute, we multiply by 1000, since there are 1000 millimeters in one meter, and multiply by 60: 700 kn x 1000 x 60 = 42,000,000 mm/min

Miles Per Hour

Definition of Miles Per Hour

Miles per hour (mph, m.p.h., MPH, or mi/h) is a unit of speed that measures how fast something is moving in terms of miles per unit of time. It is commonly used in the United States, the United Kingdom, and some other countries that use the US Standard system of measurement or have close historical ties with them. The speed limit signs on roads and highways are usually expressed in mph.

One mile per hour is equal to 1.609344 kilometers per hour, or 0.44704 meters per second. It can also be converted to other units of speed, such as feet per second, knots, or meters per second, by using appropriate conversion factors.

How to Convert Miles Per Hour

To convert miles per hour to other units of speed, we need to multiply or divide by the corresponding conversion factors. For example, to convert miles per hour to kilometers per hour, we need to multiply by 1.609344, since there are 1.609344 kilometers in one mile. To convert miles per hour to meters per second, we need to multiply by 0.44704, since there are 0.44704 meters in one mile.

Here are some examples of how to convert miles per hour to other units of length in the US Standard system and the SI system:

• To convert 10 mph to kilometers per hour (km/h), we multiply by 1.609344: 10 mph x 1.609344 = 16.09344 km/h
• To convert 20 mph to feet per second (fps), we multiply by 1.466666667, since there are 1.466666667 feet in one mile: 20 mph x 1.466666667 = 29.33333334 fps
• To convert 30 mph to knots (kn), we multiply by 0.8689762421, since there are 0.8689762421 nautical miles in one mile: 30 mph x 0.8689762421 = 26.069287263 kn
• To convert 40 mph to meters per second (m/s), we multiply by 0.44704: 40 mph x 0.44704 = 17.8816 m/s
• To convert 50 mph to meters per minute (m/min), we multiply by 26.8224, since there are 26.8224 minutes in one hour: 50 mph x 26.8224 = 1341.12 m/min
• To convert 60 mph to centimeters per second (cm/s), we multiply by 100, since there are 100 centimeters in one meter, and multiply by 0.44704: 60 mph x 100 x 0.44704 = 2682 cm/s

Where Miles Per Hour Are Used

Miles per hour are mainly used in the United States, the United Kingdom, and some other countries that use the US Standard system of measurement or have close historical ties with them. They are often used for car speeds and road signs, as well as for trains, planes, boats, and bicycles.

For example, a car may have a speed of 60 mph, which means that it travels a distance of 60 miles in one hour. A road sign may indicate a speed limit of 55 mph, which means that drivers should not exceed this speed on that road section. A train may have a speed of up to 150 mph, which means that it covers a distance of up to 150 miles in one hour.

Miles per hour are also used in some other fields, such as sports, weather, and astronomy, where the speed or velocity of an object or phenomenon is measured in miles per unit of time.

History of Miles Per Hour

The origin of miles per hour as a unit of speed can be traced back to the development of the US Standard system and the mile as a unit of length in the late eighteenth century. The mile was defined as one thousand six hundred and nine meters (or eight furlongs) based on the English statute mile.

The term mile first appeared in English in the late fourteenth century, but it was not until later in the early nineteenth century that the use of miles per hour became more common; before that, other units such as feet per second or leagues per hour were preferred for expressing speed.

Miles per hour have been used ever since as a standard unit of speed for the United States, the United Kingdom, and some other countries that use the US Standard system or have close historical ties with them. They have also been adopted by some international organizations and conventions, such as the International Civil Aviation Organization and the International System of Units.

Example Conversions of Miles Per Hour to Other Units

Here are some examples of how to convert miles per hour to other units of speed, using the conversion factors given above:

• To convert 100 mph to kilometers per hour, we multiply by 1.609344: 100 mph x 1.609344 = 160.9344 km/h
• To convert 200 mph to feet per second, we multiply by 1.466666667: 200 mph x 1.466666667 = 293.3333334 fps
• To convert 300 mph to knots, we multiply by 0.8689762421: 300 mph x 0.8689762421 = 260.69287263 kn
• To convert 400 mph to meters per second, we multiply by 0.44704: 400 mph x 0.44704 = 178.816 m/s
• To convert 500 mph to meters per minute, we multiply by 26.8224: 500 mph x 26.8224 = 13411.2 m/min
• To convert 600 mph to centimeters per second, we multiply by 100 and multiply by 0.44704: 600 mph x 100 x 0.44704 = 268200 cm/s
• To convert 700 mph to millimeters per minute, we multiply by 1000, since there are 1000 millimeters in one meter, and multiply by 26.8224: 700 mph x 1000 x 26.8224 = 18774880 mm/min

EspañolRussianFrançais