Nordictrack S15I Factory Reset (2024)

FAQs

Where is the reset button on a NordicTrack S15i bike? ›

This means restoring the console to its original settings and deleting any user data. To do this, you need to press and hold the reset button on the side of the console for 10 seconds, then release it. The console should reboot and display the initial setup screen. My nordic track s15i screen will not turn on.

Insert the paper clip into the pinhole. As you insert the paper clip, press, and hold it down. As you hold the paper clip, have the second person flip the power switch back on. Once your machine's screen lights up, you may remove the paper clip.

First, unplug the power adapter. Next, locate the small reset opening (A) on the side or the back of the console. Using a bent paper clip, press and hold the reset button inside the opening, and have a second person plug in the power adapter. Continue holding the reset button until the console turns on.

If you cancel your iFIT membership or purchase through another retailer you can still use the S15i, but you will have to manually adjust the incline, decline and resistance.

Plaintiff filed this lawsuit against iFIT alleging that iFIT manufactured and sold a variety of “smart” treadmills and other fitness equipment fitted with specialized touch screen consoles that provided features such as live workout streaming, interactive workouts, and more detailed workout tracking, and when iFIT ...

Check your outlet first, ensure the power cord is connected securely, that the cord and plug are free of damage. Now power cycle the machine by flipping the reset switch to off, then back to reset. Insert your key into the machine. If the power doesn't come on test the outlet by plugging in another appliance.

Simply push the “Start” button on your machine to begin a workout in manual mode. You'll be able to manually adjust your settings, and your screen will display an oval racetrack or similar graphic as you work out.

If the power has stopped working first replace the batteries. Make sure they are facing the right direction and that the connections are clean, and free of damage. If the console still wont work, you may want to get a power supply (if available for your machine) or new console.

To do this, press and hold the STOP and SPEED INCREASE buttons (this will be either an up arrow or a + (plus) symbol). While holding these buttons, insert the safety key onto the console. This will cause the machine to go into calibration mode. After this has occurred, you may let go of the buttons and the safety key.

Check the treadmill's belt. Make sure that the belt is properly lubricated and that it is not too tight or too loose. Check the treadmill's motor. If the motor is making any unusual noises,then it may be defective.

Does the NordicTrack S15i have Bluetooth? ›

NEW Bluetooth Headphone Connectivity

Quickly link your own Bluetooth-enabled headphones (not included) to the Commercial S15i Studio Cycle and enjoy high-quality in-ear audio.

The power button location may vary depending on the model of your NordicTrack S22i bike. On some older models, there is a red power switch next to the power cord that you can turn on or off.

No, you can still use your NordicTrack machine in manual mode and also run a small selection of onboard workouts. However, you will need a paid subscription to access the full workout library on iFIT. Currently, you can get a 30-day iFIT subscription included with your NordicTrack purchase.

Here are some additional troubleshooting tips:Make sure that the treadmill is plugged in properly. Check to see if there is a power outage. Try restarting your router. Try unplugging the treadmill for 30 seconds and then plugging it back in.

Simply push the “Start” button on your machine to begin a workout in manual mode. You'll be able to manually adjust your settings, and your screen will display an oval racetrack or similar graphic as you work out.