Ford F150 (1997-2004) Fuse Diagram • FuseCheck.com (2024)

FAQs

What fuse is on the driver side window of a 1997 Ford f150? ›

The first two fuses, fuse 25, a 30amp fuse and fuse22, a 50amp fuse are in the power distribution box on the driver side of the engine compartment. The other fuse, fuse 14, a 15amp, is located under the drivers dash in that panel.

On the 2004 Ford Truck F-150 Heritage Pickup with the V6-4.2L engine, the fuse for the oxygen sensors is located in the under-hood fuse block. The fuse is # F1. 23. This is a 15amp fuse.

Engine fuse boxes are typically situated near the battery. In this vehicle, the battery is on the driver's side, and there is a fuse box right above it with a black plastic cover to protect the fuses. On the passenger side, there is also a battery, and the fuse box is located nearby.

If only one window stops working, the problem could be a bad relay, fuse issue, bad motor, or the power window switch has failed. The most common reason for one window to stop working is the switch, so this should be looked at by a professional mechanic to have your power window switch replaced.

There are a multitude of reasons why your car window won't roll up, including: The fuses are blown, preventing the electrical controls handling the window from working. The child safety lock is engaged by accident. The window switch is functioning correctly, but the window motor has malfunctioned.

To answer your question, there is no fuse for the coolant temperature sensor, it is connected directly to the vehicle ECM. The ECM supplies a supply voltage on one wire, and the other wire is the signal wire returning to the ECM .

The IOD fuse is the fuse that controls current flow thru the circuit for "keep alive memory" which means it will be powered with the key off. With the key off and all accessories/controllers asleep amperage draw should be no more than 30 milliamps(. 030 amps).

Sometimes a fuse is bad but not necessarily blown. In this case, the best way to test it is with a test light or a multimeter. These are both relatively inexpensive tools and provide an easy way of checking if there's a current running through the fuse.

Open the fuse box and look at the glass containers that hold the fuses. If you can see that the fuse is visibly broken, or there is metallic residue on the glass from the fuse blowing, you will need to replace that particular fuse. Always turn your power off before replacing a fuse.

Answer: The function of the ACC wire is to provide power to vehicle accessory devices, such as additional lights, radio, audio systems, GPS navigation, car chargers, and more. This allows drivers and passengers to use these electrical devices when the vehicle is turned off.

How do you tell which fuse is which? ›

Fuses are typically colour-coded to indicate their amperage rating, and the amperage rating is also usually printed on top of the fuse.

Generally most systems have only 1 fuse for the entire power windows so with only 1 window not working, I do not suspect a fuse and instead a faulty window motor or window switch.

The AC fuse on most HVAC systems is typically on the unit's control board. You'll normally find the board behind an access panel on the unit's lower compartment. While you sometimes have to unscrew areas to access the control board, others have clips.

The most common reasons a Ford F-150 window won't go up or down are window's electrical system such as a fuse or relay, a broken window motor, or a broken window regulator.